BluBoxx Communication Private Limited
BluBoxx Communication Private Limited
Gultekdi, Pune, Maharashtra
GST No. 27AAGCB6960P1ZZ
TrustSEAL Verified
Call 08048407260 64% Response Rate
SEND EMAIL

Industrial PCI Cards

Prominent & Leading Manufacturer from Pune, we offer cifx 50-re ether cat-master pc card, cifx 50-co ca nopen-master pc card, cifx 50-dn device net-master pc card, cifx 50-2dn device net-slave pc card, cifx 50-dp master pc card and cifx 50-2dp dual channel pc card.

CIFX 50-RE Ether CAT-Master PC Card

CIFX 50-RE Ether CAT-Master PC Card
  • CIFX 50-RE Ether CAT-Master PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
Dimension/Size120 x 94.5 x 18.5 mm
ModelCIFX 50-RE
RAM8 MB SDRAM
Transmission Rate33 MHz
Data Width32-Bit
Isolation Voltage1000 V DC
Maximum Current650 mA
Operating Temperature0-55 deg C
Weightmax. 150 g
Galvanic Isolationpotential free isolated
Dual-Port-Memory64 kByte, 8-/16 bit

PC cards in all formats for all protocols:

  • The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.
  • The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.
  • Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.
  • The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.


Universal PC card for Master & Slave

  • Hilscher‘s PC cards cifX are based on the multiprotocol chip netX 100 and are designed as so called universal cards. Means the same card can be used as Master or as Slave, respectively one hardware supports all RealTime Ethernet systems - all using the same application interface. A change of functionality is done by just loading an appropriate firmware and adding a software license for the master. In addition dedicated PC cards, as for CC-Link IE Field or netX 90 based cards, are designed for Slave only


Real-Time Ethernet & Fieldbus protocols:

  • As specialist for industrial communication Hilscher offers the largest selection of protocols used in the factory automation. Besides traditional Fieldbusses, all major Real-Time Ethernet protocols are available as Master or Slave.


Device Drivers:

  • For a quick and easy integration Hilscher offers a wide range of device drivers. Besides a C-Toolkit free of charge, drivers for all relevant operating systems, as well as softPLC drivers from 3rd party suppliers, are available


Scope of delivery:

  • A complete software package is always included in the scope of delivery. This package consists of one FDT-based configuration tool (IEC standard) for all products and networks, loadable firmware, documentation and a driver toolkit. Numerous drivers for different operating systems are also available

Configuration:

  • Graphical and intuitive configuration tool for a simple and fast commissioning 
  • One tool for all products and automation networks
  •  Configuration of Master and Slave 
  • Based on common FDT / DTM standards 
  • Including topology editor for PROFINET I/O IRT Controller
Request
Callback
Yes! I am Interested

CIFX 50-CO CA Nopen-Master PC Card

CIFX 50-CO CA Nopen-Master PC Card
  • CIFX 50-CO CA Nopen-Master PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
Dimension/Size120 x 94.5 x 18.5 mm
Data Width32-Bit
Humidity10-95%
Isolation Voltage1000 V DC
Maximum Current650 mA
ModelCIFX 50-CO
Operating Temperature-20 to 70 deg C
RAM8 MB SDRAM
Transmission Rate33 MHz
Weightmax. 150 g
Dual Port Memory64 kByte, 8-/16 bit

PC cards in all formats for all protocols:

  • The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.
  • The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.
  • Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.
  • The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.


Universal PC card for Master & Slave

  • Hilscher‘s PC cards cifX are based on the multiprotocol chip netX 100 and are designed as so called universal cards. Means the same card can be used as Master or as Slave, respectively one hardware supports all RealTime Ethernet systems - all using the same application interface. A change of functionality is done by just loading an appropriate firmware and adding a software license for the master. In addition dedicated PC cards, as for CC-Link IE Field or netX 90 based cards, are designed for Slave only


Real-Time Ethernet & Fieldbus protocols:

  • As specialist for industrial communication Hilscher offers the largest selection of protocols used in the factory automation. Besides traditional Fieldbusses, all major Real-Time Ethernet protocols are available as Master or Slave.


Device Drivers:

  • For a quick and easy integration Hilscher offers a wide range of device drivers. Besides a C-Toolkit free of charge, drivers for all relevant operating systems, as well as softPLC drivers from 3rd party suppliers, are available


Scope of delivery:

  • A complete software package is always included in the scope of delivery. This package consists of one FDT-based configuration tool (IEC standard) for all products and networks, loadable firmware, documentation and a driver toolkit. Numerous drivers for different operating systems are also available


Configuration:

  • Graphical and intuitive configuration tool for a simple and fast commissioning 
  • One tool for all products and automation networks
  •  Configuration of Master and Slave 
  • Based on common FDT / DTM standards 
  • Including topology editor for PROFINET I/O IRT Controller
Request
Callback
Yes! I am Interested

CIFX 50-DN Device Net-Master PC Card

CIFX 50-DN Device Net-Master PC Card
  • CIFX 50-DN Device Net-Master PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
Data Width32-Bit
Humidity10-95%
Isolation Voltage1000 V DC
Maximum Current650 mA
ModelCIFX 50-DN
Operating Temperature-20 to 70 deg C
RAM8 MB SDRAM
Transmission Rate33 MHz
Weightmax. 150 g
Galvanic IsolationPotential Free Isolated
Dual Port Memory64 k Byte, 8-/16 bit

The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation. The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware. Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available. The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands

Universal PC card for Master & Slave

  • Hilscher‘s PC cards cifX are based on the multiprotocol chip netX 100 and are designed as so called universal cards. Means the same card can be used as Master or as Slave, respectively one hardware supports all RealTime Ethernet systems - all using the same application interface. A change of functionality is done by just loading an appropriate firmware and adding a software license for the master. In addition dedicated PC cards, as for CC-Link IE Field or netX 90 based cards, are designed for Slave only

Real-Time Ethernet & Fieldbus protocols:
  • As specialist for industrial communication Hilscher offers the largest selection of protocols used in the factory automation. Besides traditional Fieldbusses, all major Real-Time Ethernet protocols are available as Master or Slave.

Device Drivers:
  • For a quick and easy integration Hilscher offers a wide range of device drivers. Besides a C-Toolkit free of charge, drivers for all relevant operating systems, as well as softPLC drivers from 3rd party suppliers, are available

Scope of delivery:

  • A complete software package is always included in the scope of delivery. This package consists of one FDT-based configuration tool (IEC standard) for all products and networks, loadable firmware, documentation and a driver toolkit. Numerous drivers for different operating systems are also available

Configuration:

  • Graphical and intuitive configuration tool for a simple and fast commissioning 
  • One tool for all products and automation networks
  •  Configuration of Master and Slave 
  • Based on common FDT / DTM standards 
  • Including topology editor for PROFINET I/O IRT Controller
Request
Callback
Yes! I am Interested

CIFX 50-2DN Device Net-Slave PC Card

CIFX 50-2DN Device Net-Slave PC Card
  • CIFX 50-2DN Device Net-Slave PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
Dimension/Size120 x 94.5 x 18.5 mm
Data Width32-Bit
Humidity10-95%
Isolation Voltage1000 V DC
Maximum Current700 mA
ModelCIFX 50-2DN
Operating Temperature-20 to 70 deg C
RAM8 MB SDRAM
Transmission Rate33 MHz
Weightmax. 150 g

PC cards in all formats for all protocols:

  • The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.
  • The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.
  • Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.
  • The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.


Universal PC card for Master & Slave

  • Hilscher‘s PC cards cifX are based on the multiprotocol chip netX 100 and are designed as so called universal cards. Means the same card can be used as Master or as Slave, respectively one hardware supports all RealTime Ethernet systems - all using the same application interface. A change of functionality is done by just loading an appropriate firmware and adding a software license for the master. In addition dedicated PC cards, as for CC-Link IE Field or netX 90 based cards, are designed for Slave only


Real-Time Ethernet & Fieldbus protocols:

  • As specialist for industrial communication Hilscher offers the largest selection of protocols used in the factory automation. Besides traditional Fieldbusses, all major Real-Time Ethernet protocols are available as Master or Slave.


Device Drivers:

  • For a quick and easy integration Hilscher offers a wide range of device drivers. Besides a C-Toolkit free of charge, drivers for all relevant operating systems, as well as softPLC drivers from 3rd party suppliers, are available


Scope of delivery:

  • A complete software package is always included in the scope of delivery. This package consists of one FDT-based configuration tool (IEC standard) for all products and networks, loadable firmware, documentation and a driver toolkit. Numerous drivers for different operating systems are also available


Configuration:

  • Graphical and intuitive configuration tool for a simple and fast commissioning 
  • One tool for all products and automation networks
  •  Configuration of Master and Slave 
  • Based on common FDT / DTM standards 
  • Including topology editor for I/O IRT Controller
Request
Callback
Yes! I am Interested

CIFX 50-DP Master PC Card

CIFX 50-DP Master PC Card
  • CIFX 50-DP Master PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
Dimension/Size120 x 94.5 x 18.5 mm
ModelCIFX 50-DP
RAM8 MB SDRAM
Transmission Rate33 MHz
Data Width32-Bit
Maximum Current700 mA
Operating Temperature-20 to 70 deg C
Humidity10-95%
Weightmax. 150 g
Dual Port Memory64 kByte, 8-/16 bit

PC cards in all formats for all protocols:

  • The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.
  • The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.
  • Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.
  • The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.


Universal PC card for Master & Slave

  • Hilscher‘s PC cards cifX are based on the multiprotocol chip netX 100 and are designed as so called universal cards. Means the same card can be used as Master or as Slave, respectively one hardware supports all RealTime Ethernet systems - all using the same application interface. A change of functionality is done by just loading an appropriate firmware and adding a software license for the master. In addition dedicated PC cards, as for CC-Link IE Field or netX 90 based cards, are designed for Slave only


Real-Time Ethernet & Fieldbus protocols:

  • As specialist for industrial communication Hilscher offers the largest selection of protocols used in the factory automation. Besides traditional Fieldbusses, all major Real-Time Ethernet protocols are available as Master or Slave.


Device Drivers:

  • For a quick and easy integration Hilscher offers a wide range of device drivers. Besides a C-Toolkit free of charge, drivers for all relevant operating systems, as well as softPLC drivers from 3rd party suppliers, are available


Scope of delivery:

  • A complete software package is always included in the scope of delivery. This package consists of one FDT-based configuration tool (IEC standard) for all products and networks, loadable firmware, documentation and a driver toolkit. Numerous drivers for different operating systems are also available


Configuration:

  • Graphical and intuitive configuration tool for a simple and fast commissioning 
  • One tool for all products and automation networks
  •  Configuration of Master and Slave 
  • Based on common FDT / DTM standards 
  • Including topology editor for Profinet I/O IRT Controller
Request
Callback
Yes! I am Interested

CIFX 50-2DP Dual Channel PC Card

CIFX 50-2DP Dual Channel PC Card
  • CIFX 50-2DP Dual Channel PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
Dimension/Size120 x 94.5 x 18.5 mm
ModelCIFX 50-2DP
RAM8 MB SDRAM
Transmission Rate33 MHz
Data Width32-Bit
Isolation Voltage1000 V DC
Maximum Current700 mA
Operating Temperature-20 to 70 deg C
Humidity10-95%
Weightmax 150 g
Dual Port Memory64 kByte, 8-/16 bit

PC cards in all formats for all protocols:

  • The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.
  • The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.
  • Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.
  • The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.


Universal PC card for Master & Slave

  • Hilscher‘s PC cards cifX are based on the multiprotocol chip netX 100 and are designed as so called universal cards. Means the same card can be used as Master or as Slave, respectively one hardware supports all RealTime Ethernet systems - all using the same application interface. A change of functionality is done by just loading an appropriate firmware and adding a software license for the master. In addition dedicated PC cards, as for CC-Link IE Field or netX 90 based cards, are designed for Slave only


Real-Time Ethernet & Fieldbus protocols:

  • As specialist for industrial communication Hilscher offers the largest selection of protocols used in the factory automation. Besides traditional Fieldbusses, all major Real-Time Ethernet protocols are available as Master or Slave.


Device Drivers:

  • For a quick and easy integration Hilscher offers a wide range of device drivers. Besides a C-Toolkit free of charge, drivers for all relevant operating systems, as well as softPLC drivers from 3rd party suppliers, are available


Scope of delivery:

  • A complete software package is always included in the scope of delivery. This package consists of one FDT-based configuration tool (IEC standard) for all products and networks, loadable firmware, documentation and a driver toolkit. Numerous drivers for different operating systems are also available


Configuration:

  • Graphical and intuitive configuration tool for a simple and fast commissioning 
  • One tool for all products and automation networks
  •  Configuration of Master and Slave 
  • Based on common FDT / DTM standards 
  • Including topology editor for Profinet  I/O IRT Controller
Request
Callback
Yes! I am Interested

CIFX 50-2DP CO Dual Channel PC Card

CIFX 50-2DP CO Dual Channel PC Card
  • CIFX 50-2DP CO Dual Channel PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
ModelCIFX 50-2DP\CO
RAM8 MB SDRAM
Transmission Rate33 MHz
Data Width32-Bit
Isolation Voltage1000 V DC
Maximum Current700 mA
Operating Temperature-20 to 70 deg C
Humidity10-95%
Weightmax. 150 g
Galvanic IsolationPotential free isolated
Dual-Port-Memory64 kByte, 8-/16 bit

PC cards in all formats for all protocols:
  • The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.
  • The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.
  • Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.
  • The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.

Universal PC card for Master & Slave

  • Hilscher‘s PC cards cifX are based on the multiprotocol chip netX 100 and are designed as so called universal cards. Means the same card can be used as Master or as Slave, respectively one hardware supports all RealTime Ethernet systems - all using the same application interface. A change of functionality is done by just loading an appropriate firmware and adding a software license for the master. In addition dedicated PC cards, as for CC-Link IE Field or netX 90 based cards, are designed for Slave only

Real-Time Ethernet & Fieldbus protocols:
  • As specialist for industrial communication Hilscher offers the largest selection of protocols used in the factory automation. Besides traditional Fieldbusses, all major Real-Time Ethernet protocols are available as Master or Slave.

Device Drivers:
  • For a quick and easy integration Hilscher offers a wide range of device drivers. Besides a C-Toolkit free of charge, drivers for all relevant operating systems, as well as softPLC drivers from 3rd party suppliers, are available

Scope of delivery:

  • A complete software package is always included in the scope of delivery. This package consists of one FDT-based configuration tool (IEC standard) for all products and networks, loadable firmware, documentation and a driver toolkit. Numerous drivers for different operating systems are also available

Configuration:

  • Graphical and intuitive configuration tool for a simple and fast commissioning 
  • One tool for all products and automation networks
  •  Configuration of Master and Slave 
  • Based on common FDT / DTM standards 
  • Including topology editor for Profinet  I/O IRT Controller
Request
Callback
Yes! I am Interested

CIFX 50-2DP DN Dual Channel PC Card

CIFX 50-2DP DN Dual Channel PC Card
  • CIFX 50-2DP DN Dual Channel PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
Dimension/Size120 x 94.5 x 18.5 mm
RAM8 MB SDRAM
Transmission Rate33 MHz
Data Width32-Bit
Isolation Voltage1000 V DC
Maximum Current700 mA
Operating Temperature-20 to 70 deg C
ModelCIFX 50-2DP\DN
Humidity10-95%
Weightmax. 150 g
Galvanic Isolationpotential free isolated
Dual-Port-Memory64 kByte, 8-/16 bit

PC cards in all formats for all protocols:

  • The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.
  • The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.
  • Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.
  • The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.


Universal PC card for Master & Slave

  • Hilscher‘s PC cards cifX are based on the multiprotocol chip netX 100 and are designed as so called universal cards. Means the same card can be used as Master or as Slave, respectively one hardware supports all RealTime Ethernet systems - all using the same application interface. A change of functionality is done by just loading an appropriate firmware and adding a software license for the master. In addition dedicated PC cards, as for CC-Link IE Field or netX 90 based cards, are designed for Slave only


Real-Time Ethernet & Fieldbus protocols:

  • As specialist for industrial communication Hilscher offers the largest selection of protocols used in the factory automation. Besides traditional Fieldbusses, all major Real-Time Ethernet protocols are available as Master or Slave.


Device Drivers:

  • For a quick and easy integration Hilscher offers a wide range of device drivers. Besides a C-Toolkit free of charge, drivers for all relevant operating systems, as well as softPLC drivers from 3rd party suppliers, are available


Scope of delivery:

  • A complete software package is always included in the scope of delivery. This package consists of one FDT-based configuration tool (IEC standard) for all products and networks, loadable firmware, documentation and a driver toolkit. Numerous drivers for different operating systems are also available


Configuration:

  • Graphical and intuitive configuration tool for a simple and fast commissioning 
  • One tool for all products and automation networks
  •  Configuration of Master and Slave 
  • Based on common FDT / DTM standards 
  • Including topology editor for Profinet I/O IRT Controller
Request
Callback
Yes! I am Interested

CIFX 50-2CO DN Dual Channel PC Card

CIFX 50-2CO DN Dual Channel PC Card
  • CIFX 50-2CO DN Dual Channel PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
ModelCIFX 50-2CO\DN
RAM8 MB SDRAM
Transmission Rate33 MHz
Data Width32-Bit
Isolation Voltage1000 V DC
Maximum Current700 mA
Operating Temperature-20 to 70 deg C
Humidity10-95%
Weightmax. 150 g
Galvanic Isolationpotential free isolated
Dual-Port-Memory64 kByte, 8-/16 bit

PC cards in all formats for all protocols:
  • The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.
  • The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.
  • Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.
  • The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.
Request
Callback
Yes! I am Interested

CIF 50-ASIM AS Interface Master PC Card

CIF 50-ASIM AS Interface Master PC Card
  • CIF 50-ASIM AS Interface Master PC Card
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

BrandHilscher
ModelCIF 50-ASIM
Data Width1000 V DC
Maximum Current650 mA
Operating Temperature0-55 deg C
Frequency50 Hz
Packaging TypeBox

Fieldbus integration for PC-based systems:
  • Whether as Master or Slave, fieldbus systems have been proven themselves excellently in PC-based automation. For more than 10 years, the CIF communication interface cards from the Hilscher Company are used successfully in the most varied areas of application and are now a standard in the market.

PC cards in all formats:
  • With the CIF communication interface, the user will have a unified standard for all the fieldbus systems on different hardware platforms. We supply our PC communication cards with PC/104 respectively PCI busses in standard, PC/104+, PCI-104, Compact PCI or PMC format respectively as PCMCIA card for all leading fieldbus systems. 
Request
Callback
Yes! I am Interested
X

Explore More Product



Reach Us
Akshay S. Kirad (Director)
BluBoxx Communication Private Limited
Off 102/B, Surekha Apartment
Gultekdi, Pune - 411037, Maharashtra, India


Call Us


Send E-mailSend SMS